Polartec material note

Polartec Sourcing FAQ: Power Stretch, Polartec 200, Softshell Wholesale & Nylon Fabric

2026-09-03 · Lucia Bianchi

I'm the sourcing lead at a technical fabric distributor that supplies cut-and-sew factories and apparel brands that specify Polartec. Over the last eight years or so, I've handled a fair number of requests that came in with a deadline attached—sometimes because a production slot moved up, sometimes because the wrong fabric arrived at the factory. Once you've been through enough of those, you realize buyers ask the same questions in a hurry that they'd ask calmly if they had an extra month. Here are seven I get over and over, along with the answers I give when there's time to explain them properly.

Polartec vs. regular fleece: what are you actually paying for?

From a fabric buyer's chair, Polartec is not one fabric. It's a brand with a wide range of knits: Polartec 200, Power Stretch, Thermal Pro, Wind Pro, NeoShell, and a few others. When a factory says its fleece is 'like Polartec,' ask which Polartec they mean and what 'like' means.

To be fair, an unbranded fleece can look similar in a photograph. The difference usually shows up in two places. First, the spec sheet: every Polartec roll we stock includes a physical specification—weight in grams per square meter, thickness, shrinkage, and finishing details. Second, reorder behavior. If a generic mill changes suppliers between batches, the next rolls can arrive heavier, thinner, or with a different hand feel. On a cutting table, that is when sizing and drape start drifting.

If the product is a promotional give-away, buy the cheap fleece. If your label goes on the garment, buy something you can reorder with confidence.

What is Polartec Power Stretch fabric?

Power Stretch is a family of stretch fleece fabrics. The usual construction combines a smooth, snag-resistant face with a brushed, warm back, plus spandex in the knit for stretch and recovery. Put another way: it feels like athletic fabric on the outside and fleece on the inside. Most people call it 'stretchy fleece,' which is true but misses the point—the recovery is what keeps cuffs, elbows, and knees from bagging out over a season of wear.

It is not the fabric I would put in a casual winter jacket. Power Stretch works best in garments that have to follow the body: base layers, active midlayers, cuffs, gaskets, and softshell linings. It is also a family, not a single SKU. I might be misremembering the current Polartec lineup, but there are versions with heavier faces and different abrasion characteristics. So I usually ask what the garment is doing before recommending a Power Stretch option.

What does Polartec 200 mean in a hoodie?

The 200 refers to a weight class—historically a midweight fleece around 200 grams per square meter. A Polartec 200 hoodie is a good daily-driver layer: warm enough for cool weather, soft next to the skin, and not too bulky to wear under a shell. For outdoor apparel brands, a fleece like this often becomes the backbone of the fall lineup.

When someone compares an Outdoor Research men's Polartec 200 hoodie to a private-label version, the key spec is the fabric. The cut and zippers decide how well the garment fits; the Polartec 200 decides warmth, breathability, and hand feel. If the garment uses genuine Polartec, the performance should be consistent from one batch to the next.

That said, 200-series fleece is not windproof or waterproof. I don't see that as a flaw, but the end customer should understand what the fabric is made for. Windy winter days call for a shell, a wind-resistant fleece like Wind Pro, or a softshell.

Softshell fabric wholesale: what should buyers check?

Softshell is a construction, not a single material. Most softshell fabrics combine a stretch-woven face, sometimes a membrane, and a knit backer. The performance lives in that combination, and that is where wholesale orders often go wrong.

Three specs matter most to me. Face fiber and stretch: nylon faces are generally tougher; polyester faces can be lighter and less costly, and you should know whether the stretch is two-way or four-way. Lamination: if a softshell claims to be waterproof, ask for the membrane and the test report rather than just taking the word 'waterproof.' Backer: a fleece backer adds warmth; a tricot backer feels smoother against the skin. Weight in gsm helps you compare candidates on an equal basis.

A shell for alpine use and a jacket for cycling can look the same in a low-resolution photo, but their face fabric, membrane, and stretch charts say otherwise. That is why I ask for the end use before talking price.

What should a performance fabric sourcing request include?

At a minimum: the Polartec family or generic fabric construction, target gsm, color standard, roll width, finish, required test data, delivery date, and end use. End use is the item I see missed most often, probably because it seems obvious. It is not obvious. A softshell for a cycling jacket and a softshell for a mountaineering shell are not necessarily the same fabric.

Color deserves its own paragraph. Navy means six different things to a dye house. If you have a Pantone textile reference or an approved lab dip, send it; a written color name is the cheapest miscommunication you will ever have in sourcing.

And if the plan is to make claims about recycled content, a specific certification, or a level of water resistance, ask the supplier for the documentation before you commit. I would rather tell a client we cannot substantiate a claim than have a program stop while compliance questions get sorted.

How to choose nylon fabric for wholesale

Start with what the nylon needs to do, because a denier number without a job is trivia. For a softshell face or a stretch woven outer layer, nylon in the 40D to 70D range is common, often with spandex added so the fabric stretches. For lining, a low-weight 20D or 30D ripstop gives good tear strength at very little weight. For bags and workwear, most buyers step up to 200D to 500D and add a coating for water resistance.

The polymer also matters if you get deep into the spec. Nylon 66 generally gives better abrasion resistance and a higher melting point; nylon 6 tends to cost less and dye more easily. Neither is automatically better until the application is clear. In any case, do not buy against the word 'nylon ripstop' alone. Denier, weave, finish, and gsm all belong in the order. A wholesale order placed against an incomplete spec often ends in a claim or a redo.

Can you get Polartec fabric fast in an emergency?

Sometimes yes, but speed depends on inventory and flexibility. If the exact Polartec family and color are sitting in a distributor's warehouse, an order can be ready in days. If the fabric has to be produced at the mill, no amount of rush will replace the manufacturing time.

In March 2024, a client called on a Tuesday afternoon. They needed a little over 600 yards of Polartec Thermal Pro for a production slot that Friday. Normally we would have used ground freight, but the margin was too tight. We used air freight and paid about $800 more than I wanted to. The rolls arrived in time. In hindsight, the emergency was preventable—the specification had been decided weeks earlier, but the purchase order stayed in an internal approval queue. That lesson stuck with me: most fabric emergencies are actually communication or approval delays, and fixing that blocker is more valuable than finding an expedited freight lane.